Vacuum Aluminized Graphite Crucible Application
Vacuum aluminizing film is a production process that we make aluminum metal evaporate and then plate it on the surface of the film base material to form a composite film under the vacuum condition. Such substrates as BOPET, BONY, BOPP, PE, PVC, direct evaporation aluminum aluminizing process is usually applied, while substrate as paper, leather, evaporation aluminizing and transferring process usually applied
Vacuum Aluminized Graphite Crucible Advantages:
1. High bulk density and low porosity;
2. High purity and low ash content;
3. Antioxidant properties, low consumption and long service life;
4. Being used continuously over 40 hours.
Physical and chemical index:
The Graphite crucible have adopted three kinds of materials:Fine-grain Specialty Graphite, High pure graphite, Isostaic graphite.
Fine-grain Specialty Graphite |
High pure graphite |
Isostaic graphite |
||
Item |
Unit |
Typical value |
Typical value |
Typical value |
Max grain size |
0.8mm |
≤325mesh |
5-22vm |
|
Bulk density |
g/cm3 |
1.73-1.76 |
1.68-1.85 |
1.8-1.85 |
Specific resistance |
Μ Ω .m |
7.5 |
≤14 |
≤15 |
Bending strength |
M pa |
11-12.5 |
≥25 |
12.5 |
Compressive strength |
M pa |
27-34 |
≥50 |
34 |
Thermal Conductivity |
W/(m .k) |
150-160 |
≥130 |
160 |
C.T.E.(100-600)℃ |
10-6/℃ |
2.2 |
≤2.5 |
2.1 |
Ash content |
% |
0.09 |
≤0.15 |
0.09 |